Identify Oregon Sunstone

Jewelry lovers and gem collectors worldwide adore the Oregon Sunstone. These incredible gems display a schiller effect and they’re only sourced in Oregon.

The Shiller effect is made up of small inclusions of copper. When light hits these inclusions the stone will sparkle from the inside but it doesn’t have to be cut into a cabochon or faceted for you to see this phenomenon.

Oregon Sunstone comes in clear, yellow, red, orange, teal, and green. Please note that the green is not vibrant and when you cut the stone it is typically dark.

 

How to Identify Oregon Sunstone Through Testing

There are various ways to identify rocks, minerals, crystals, and gemstones, but we will use a method I learned while attending the Gemological Institute of America.  If you’ve learned a unique way to identify gems, please share it with us.

Let’s look deeper into how to identify Oregon Sunstone like a pro. 

 

 

Visual Inspection

The visual inspection starts with what form of Oregon Sunstone you have.  The questions below are relatively easy to answer, but each type will have its own process for identifying them.

 

 

Is it a cabochon? A cabochon should have a medium to high polish with little to no pitting. Most of the time these stones will produce a Shiller effect and they’re easily sourced.

 

 

Is it faceted? If you have a faceted piece of Oregon Sunstone, it should be transparent but it can contain copper inclusions which will make it look cloudy. The colors will range from clear to yellow to red to green.

For some reason, the green typically makes the faceted stone fairly dark. The light that is reflected gets captured or routed in a way that doesn’t reflect to your eye. This is an easy effect to spot when trying to ID a stone.

 

Is it a specimen? Oregon Sunstone is found in different forms. You’ll better identify these forms by looking at and inspecting this mineral over time. Here’s a list of characteristics Oregon Sunstone displays when it’s a specimen.

• Oregon Sunstone’s metallic copper inclusions cause a range of colors and optical effects.
• These gems grow in triclinic structures.
• Most specimens found are light gold/yellow, light to pastel straw, and light champagne hues.
• Oregon Sunstone will have red or green sections inside the yellow. It almost looks like it is trapped inside.

 

Is it tumbled? It is very common to find tumbled Oregon Sunstone. It will have a medium to high polish and these stones will be of lower quality.

 

Physical Properties of Oregon Sunstone

Let’s take a look at the physical properties of Oregon Sunstone. Knowing what to look for will help you more easily identify what you’re looking at.

Color: Colorless, Pale Yellow, Pink, Orange, Red, Green, Blue-Green 

Clarity / Transparency: Transparent

Luster: Vitreous

Cleavage: Perfect

Fracture: Splintery

 

The Streak Test

This is a destructive test, so you must ensure that you can damage the specimen or stone if you choose to use this method.  You won’t use destructive tests once you’ve developed robust knowledge in identifying rocks and minerals.

A mineral streak test is when you scrape the stone against a harder surface to see what color remains. Oregon Sunstone always produces a white streak.

Tumbled specimens are tested by scraping samples across a piece of ungalvanized porcelain, typically known as a streak plate.

 

Magnet Test

Oregon Sunstones display a weak magnetic attraction.

 

Hardness Test

I don’t recommend actively testing the hardness of a stone because it’s destructive in nature and doesn’t provide a definite answer to what type of stone it is.  Oregon Sunstone has a hardness of 6 to 6.5 on the Mohs hardness scale.

 

Refractive Index Test

Determining the refractive index, or RI, as it’s referred to by gemologists for Oregon Sunstone, is relatively straightforward. Still, you’ll need a specific piece of test equipment and the RI fluid to go with it.  Before you place the stone on the refractometer, you want to make sure you have a flat, somewhat polished surface to take a reading.

 

Oregon Sunstone’s Refractive Index: 1.56 – 1.58

 

Each gemstone has its own RI, so discovering a sample’s RI can help you figure out what sort of stone it actually is.

 

Step 1 – Place a small bead of RI fluid on the metal surface of the refractometer near the back of the crystal hemicylinder (the window on which the stone will sit).

Step 2 – Place the stone facet face down on the fluid dot and slide it toward the middle of the hemicylinder crystal using your fingers.

Step 3 – Look through the viewer lens without magnification. Continue looking until you see the outline of a bubble, then look at the bottom of this bubble. Take the reading from there, rounding the decimal to the nearest hundredth.

 

Occasionally, you’ll run into the issue of not having a flat surface to work with.  In this instance, you’ll need to leave the top of the refractometer open and hold the rounded stone with your hand.  Hopefully, you can pull a reading off of the gauge.

 

Birefringence Test

Consider testing the birefringence, as well. Birefringence is related to RI. While doing the birefringence test, you will turn the gemstone on the refractometer six times throughout the observation period and note the changes.

Perform a standard RI test. Instead of keeping the stone still, gradually turn it 180 degrees, making each separate turn about 30 degrees. At each 30-degree mark, take a new RI reading.

Subtract the lowest reading from the highest to find the stone’s birefringence. Round it to the nearest thousandth.

 

Birefringence: 0.009

 

Single or Double Refraction

Oregon Sunstone displays a double refraction.

The stone must be transparent for this test to be accurate and beneficial.  If the light won’t pass through the stone, there is no way to test for single or double refraction.

Check for single or double refraction. Use this test on translucent and transparent stones. You can determine whether the stone is only singly refractive (SR) or doubly refractive (DR) to help identify it. Some stones can also be classified as aggregate (AGG).

Turn on the light of a polariscope and place the stone face down on the lower glass lens (polarizer). Look through the top lens (analyzer), turning the top lens until the area around the stone looks darkest. This is your starting point.

Turn the analyzer 360 degrees and watch how the light around the stone changes.

If the stone appears dark and stays dark, it is likely an SR. If the stone starts out light and remains light, it is likely AGG. If the lightness or darkness of the stone changes, it is likely DR.

 

Checking The Diaphaneity

Diaphaneity refers to the mineral’s ability to transmit light. For instance, some minerals are transparent or translucent. A small amount of distortion might occur when they’re thick, but light will pass through them relatively freely.

Oregon Sunstone is transparent to translucent.

 

Finding The Specific Gravity

Every stone has its unique specific gravity, which helps us identify them. Specific gravity is one of the best properties to measure when identifying mineral specimens. Most minerals have a narrow range of specific gravity, so getting an accurate measurement can go a long way toward identification.

Specific gravity is a unitless number describing how heavy a mineral is compared to equal volumes of water. For example, if a mineral is three times as dense as water, it’ll have a specific gravity of three. This is useful because while two minerals might be the same size, they’ll each have a different specific gravity.

The larger the sample, the more precise the readings tend to be. Remember that this technique can only be used for single mineral or crystal masses. It will not work for minerals embedded in host rocks.

 

Oregon Sunstone’s Specific Gravity: 2.64 – 2.66

 

As helpful as specific gravity is for identifying minerals, amateurs are usually constrained by the need for more necessary tools for the job. However, one way to work around this is to hold the specimen and note how heavy or hefty it feels compared to what you might expect a specimen of that size to weigh.

If you want to determine the specific gravity of your stone like a pro, you’ll need to invest in a higher-end scale.  The OHAUS Density Determination Kit is the one gemologists use.

 

Identifying Rocks and Minerals Like a Pro

Hopefully, you feel confident in your practice of identifying a piece of Oregon Sunstone after reading and applying this guide.  You’ll be using the visual part of this guide the most, and you’ll get better as you interact with more gemstones.  Before you know it, you’ll be identifying stones like a gemologist.

Feel free to reach out if you encounter any issues or need clarification. I’ll do my best to assist you in the identification process.