Gemologist Guide To Identifying Brazilianite

Brazilianite is a rare Sodium Phosphate mineral that crystallizes in the form of radiating prismatic crystals, elongated rods, and globular droplets. This gemstone is usually found growing off Granite Pegamites rich in Phosphate.

Brazilianite is an incredibly eye-catching yellow-green color, with Phosphate impurities depicting the depth of color.

This rare gem was first discovered in 1944 but was initially incorrectly identified as Chrysoberyl because of its similarities in color and structure. It wasn’t until a year later that the name was officially recorded as Brazilianite.

 

 

How to Identify Brazilianite Through Testing

There are various ways to identify rocks, minerals, crystals, and gemstones, but we will use a method I learned while attending the Gemological Institute of America.  If you’ve learned a unique way to identify gems, please share it with us.

Let’s look deeper into how to identify Brazilianite as a pro.

 

Visual Inspection

The visual inspection starts with what form of Brazilianite you have.  The questions below are relatively easy to answer, but each type will have its own process for identifying them.

 

Is it a cabochon? A cabochon should have a medium to high polish with little to no pitting. Most Brazilianites contain natural inclusions.

 

 

Is it faceted? If you have a faceted piece of Brazilianite, it should be transparent. It will be difficult to visually ID this stone because it resembles Chrysoberyl. This means you’ll need to do additional testing to confirm. Inclusions and a lemon-yellow color are common.

 

 

Is it a specimen? Brazilianite is found in different forms. You’ll better identify these forms by looking at and inspecting this mineral over time. Here’s a list of characteristics Brazilianite displays when it’s a specimen.

• Most specimens are single loose crystals.
• Brazilianite specimens on a matrix (host rock), especially those in clusters, are rare.
• Colors vary.

 

Is it tumbled? It is very uncommon to find tumbled Brazilianite but you will come across lower-quality pieces that are chunky but not tumbled.

 

 

Physical Properties of Brazilianite

Let’s take a look at the physical properties of Brazilianite. Knowing what to look for will help you more easily identify what you’re looking at.

Color: Chartreuse Yellow, Pale Yellow, Colorless, Yellow Green – Colorless varieties are colorless in transmitted light.

Clarity / Transparency: Transparent

Luster: Vitreous, Sub-vitreous, Waxy

Cleavage: Distinct/Good – Good on {010}

Fracture: Conchoidal

 

The Streak Test

This is a destructive test, so you must ensure that you can damage the specimen or stone if you choose to use this method.  You won’t use destructive tests once you’ve developed robust knowledge in identifying rocks and minerals.

A mineral streak test is when you scrape the stone against a harder surface to see what color remains. Brazilianites produce a white streak.

Tumbled specimens are tested by scraping samples across a piece of ungalvanized porcelain, typically known as a streak plate.

 

Magnet Test

Brazilianite doesn’t show a magnetic response. Therefore this test would be pointless.

 

Hardness Test

I don’t recommend actively testing the hardness of a stone because it’s destructive in nature and doesn’t really provide a definite answer to what type of stone it is.  Brazilianites have a hardness of 5.5 according to the Mohs hardness scale.

 

Refractive Index Test

Determining the refractive index, or RI, as it’s referred to by gemologists for Brazilianites, is relatively straightforward. Still, you’ll need specific test equipment and the RI fluid to go with it.  Before you place the stone on the refractometer, you want to make sure you have a flat, somewhat polished surface to take a reading.

 

Brazilianite’s Refractive Index: 1.602 – 1.623

 

Each gemstone has its own RI, so discovering a sample’s RI can help you figure out what sort of stone it actually is.

 

Step 1 – Place a small bead of RI fluid on the metal surface of the refractometer near the back of the crystal hemicylinder (the window on which the stone will sit).

Step 2 – Place the stone facet face down on the fluid dot and slide it toward the middle of the hemicylinder crystal using your fingers.

Step 3 – Look through the viewer lens without magnification. Continue looking until you see the outline of a bubble, then look at the bottom of this bubble. Take the reading from there, rounding the decimal to the nearest hundredth.

 

Occasionally, you’ll run into the issue of not having a flat surface to work with.  In this instance, you’ll need to leave the top of the refractometer open and hold the rounded stone with your hand.  Hopefully, you can pull a reading off of the gauge.

 

Birefringence Test

Consider testing the birefringence, as well. Birefringence is related to RI. While doing the birefringence test, you will turn the gemstone on the refractometer six times throughout the observation period and note the changes.

Perform a standard RI test. Instead of keeping the stone still, gradually turn it 180 degrees, making each separate turn about 30 degrees. At each 30-degree mark, take a new RI reading.

Subtract the lowest reading from the highest to find the stone’s birefringence. Round it to the nearest thousandth.

Birefringence: 0.020

 

Single or Double Refraction

Brazilianite displays a slight double refraction.

The stone must be transparent for this test to be accurate and beneficial.  If the light won’t pass through the stone, there is no way to test for single or double refraction.

Check for single or double refraction. Use this test on translucent and transparent stones. You can determine whether the stone is only singly refractive (SR) or doubly refractive (DR) to help identify it. Some stones can also be classified as aggregate (AGG).

Turn on the light of a polariscope and place the stone face down on the lower glass lens (polarizer). Look through the top lens (analyzer), turning the top lens until the area around the stone looks darkest. This is your starting point.

Turn the analyzer 360 degrees and watch how the light around the stone changes.

If the stone appears dark and stays dark, it is likely an SR. If the stone starts out light and remains light, it is likely AGG. If the lightness or darkness of the stone changes, it is likely DR.

 

Checking The Diaphaneity

Diaphaneity refers to the mineral’s ability to transmit light. For instance, some minerals are transparent or translucent. A small amount of distortion might occur when they’re thick, but light will pass through them relatively freely.

Brazilianite is transparent to translucent.

 

Finding The Specific Gravity

Every stone has its unique specific gravity, which helps us identify them. Specific gravity is one of the best properties to measure when identifying mineral specimens. Most minerals have a narrow range of specific gravity, so getting an accurate measurement can go a long way toward identification.

Specific gravity is a unitless number describing how heavy a mineral is compared to equal volumes of water. For example, if a mineral is three times as dense as water, it’ll have a specific gravity of three. This is useful because while two minerals might be the same size, they’ll each have a different specific gravity.

The larger the sample, the more precise the readings tend to be. Remember that this technique can only be used for single mineral or crystal masses. It will not work for minerals embedded in host rocks.

 

Brazilianite’s Specific Gravity: 2.98

 

As helpful as specific gravity is for identifying minerals, amateurs are usually constrained by the need for more necessary tools for the job. However, one way to work around this is to hold the specimen and note how heavy or heft it feels compared to what you might expect a specimen of that size to weigh.

If you want to determine the specific gravity of your stone like a pro, you’ll need to invest in a higher-end scale.  The OHAUS Density Determination Kit is the one gemologists use.

 

Identifying Rocks and Minerals Like a Pro

Hopefully, you feel confident in your practice of identifying a piece of Brazilianite after reading and applying this guide.  You’ll be using the visual part of this guide the most, and you’ll get better as you interact with more gemstones.  Before you know it, you’ll be identifying stones like a gemologist.

Feel free to reach out if you encounter any issues or need clarification. I’ll do my best to assist you in the identification process.