Anglesite is a secondary lead mineral and forms through the alteration of lead sulfides, mainly Galena. These crystals can contain impurities of Galena, giving the specimens a gray-to-black color. In some localities, Anglesite forms as pseudomorphs after Galena, giving the crystals false isometric forms.
Some massive Anglesite specimens have gray and black banding present, which can be seen when the samples are polished or sliced. Such specimens can even contain unaltered Galena in the middle, which didn’t transform into Anglesite when the outer layers were altered.
How to Identify Anglesite Through Testing
There are various ways to identify rocks, minerals, crystals, and gemstones, but we will use a method I learned while attending the Gemological Institute of America. If you’ve learned a unique way to identify gems, please share it with us.
Let’s look deeper into how to identify Anglesite like a pro.
The visual inspection starts with what form of Anglesite you have. The questions below are relatively easy to answer, but each type will have its own process for identifying them.
Is it a cabochon? A cabochon should have a medium to high polish with little to no pitting. However, it’s not likely to find Anglesite cut en cabochon.
Is it faceted? If you have a faceted piece of Anglesite, it should be transparent. Anyone unfamiliar with gems might be fooled into believing faceted Anglesite is a yellowish Diamond.
Is it a specimen? Anglesite is found in different forms. You’ll better identify these forms by looking at and inspecting this mineral over time. Here’s a list of characteristics Anglesite displays when it’s a specimen.
- Often found in their host rock in shades of yellow or orange.
- Grows in clusters.
- When Galena is present, you might see shades of blue or green.
Is it tumbled? It is not very common to find tumbled Anglesite and if you do come across a piece of it then it should have a medium to high polish. Tumbled Anglesite is often found in a brownish color.
Physical Properties of Anglesite
Let’s take a look at the physical properties of Anglesite. Knowing what to look for will help you more easily identify what you’re looking at.
Color: Colorless to White, often tinted Yellow, Gray, Green, or Blue – Colorless in transmitted light
Clarity / Transparency: Transparent to Translucent in thin splinters
Luster: Adamantine, Resinous, Vitreous
Cleavage: Distinct/Good – Good on  Distinct on 
The Streak Test
This is a destructive test, so you need to ensure that you’re allowed to damage the specimen or stone if you choose to use this method. Once you’ve developed robust knowledge in identifying rocks and minerals, you won’t use destructive tests.
A mineral streak test is when you scrape the stone against a harder surface to see what color remains. Anglesite doesn’t produce a colored streak as it is colorless.
Tumbled specimens are tested by scraping samples across a piece of ungalvanized porcelain, typically known as a streak plate.
Anglesite is neither ferromagnetic nor magnetic. That said, this test will not be beneficial for the identification of Anglesite.
I don’t recommend actively testing the hardness of a stone because it’s destructive in nature and doesn’t really provide a definite answer to what type of stone it is. Anglesite has a hardness of 2.5 to 3 on the Mohs hardness scale.
Refractive Index Test
Determining the refractive index, or RI, as it’s referred to by gemologists for Anglesite, is relatively straightforward. Still, you’ll need a specific piece of test equipment and the RI fluid to go with it. Before you place the stone on the refractometer, you want to make sure you have a flat, somewhat polished surface to take a reading.
Anglesite’s Refractive Index: 1.878 – 1.883
Each gemstone has its own RI, so discovering a sample’s RI can help you figure out what sort of stone it actually is.
Step 1 – Place a small bead of RI fluid on the metal surface of the refractometer near the back of the crystal hemicylinder (the window on which the stone will sit).
Step 2 – Place the stone facet face down on the fluid dot and slide it toward the middle of the hemicylinder crystal using your fingers.
Step 3 – Look through the viewer lens without magnification. Continue looking until you see the outline of a bubble, then look at the bottom of this bubble. Take the reading from there, rounding the decimal to the nearest hundredth.
Occasionally, you’ll run into the issue of not having a flat surface to work with. In this instance, you’ll need to leave the top of the refractometer open and hold the rounded stone with your hand. Hopefully, you can pull a reading off of the gauge.
Consider testing the birefringence, as well. Birefringence is related to RI. While doing the birefringence test, you will turn the gemstone on the refractometer six times throughout the observation period and note the changes.
Perform a standard RI test. Instead of keeping the stone still, gradually turn it 180 degrees, making each separate turn about 30 degrees. At each 30-degree mark, take a new RI reading.
Subtract the lowest reading from the highest to find the stone’s birefringence. Round it to the nearest thousandth.
Single or Double Refraction
Anglesite has a slight double refraction.
The stone must be transparent for this test to be accurate and beneficial. If the light won’t pass through the stone, there is no way to test for single or double refraction.
Check for single or double refraction. Use this test on translucent and transparent stones. You can determine whether the stone is only singly refractive (SR) or doubly refractive (DR) to help identify it. Some stones can also be classified as aggregate (AGG).
Turn on the light of a polariscope and place the stone face down on the lower glass lens (polarizer). Look through the top lens (analyzer), turning the top lens until the area around the stone looks darkest. This is your starting point.
Turn the analyzer 360 degrees and watch how the light around the stone changes.
If the stone appears dark and stays dark, it is likely an SR. If the stone starts out light and remains light, it is likely AGG. If the lightness or darkness of the stone changes, it is likely DR.
Checking The Diaphaneity
Diaphaneity refers to the mineral’s ability to transmit light. For instance, some minerals are transparent or translucent. A small amount of distortion might occur when they’re thick, but light will pass through them relatively freely.
Anglesite is transparent to translucent.
Finding The Specific Gravity
Every stone has its unique specific gravity, which helps us identify them. Specific gravity is one of the best properties to measure when identifying mineral specimens. Most minerals have a narrow range of specific gravity, so getting an accurate measurement can go a long way toward identification.
Specific gravity is a unitless number describing how heavy a mineral is compared to equal volumes of water. For example, if a mineral is three times as dense as water, it’ll have a specific gravity of three. This is useful because while two minerals might be the same size, they’ll each have a different specific gravity.
The larger the sample, the more precise the readings tend to be. Remember that this technique can only be used for single mineral or crystal masses. It will not work for minerals embedded in host rocks.
Anglesite’s Specific Gravity: 6.37 – 6.39
As helpful as specific gravity is for identifying minerals, amateurs are usually constrained by the need for more necessary tools for the job. However, one way to work around this is to hold the specimen and note how heavy or heft it feels compared to what you might expect a specimen of that size to weigh.
If you want to determine the specific gravity of your stone like a pro, you’ll need to invest in a higher-end scale. The OHAUS Density Determination Kit is the one gemologists use.
Identifying Rocks and Minerals Like a Pro
Hopefully, you feel confident in your practice of identifying a piece of Anglesite after reading and applying this guide. You’ll be using the visual part of this guide the most, and you’ll get better as you interact with more gemstones. Before you know it, you’ll be identifying stones like a gemologist.
Feel free to reach out if you encounter any issues or need clarification. I’ll do my best to assist you in the identification process.